A note about mounting the module

This topic contains 1 reply, has 2 voices, and was last updated by  Pontus Aurdal 1 year, 2 months ago. This post has been viewed 404 times

  • Author
    Posts
  • #1642
     svenn-ivar 
    Participant

    I thought I’d just share that I got a module with the sticker on top mounted upside down compared to the picture in the “Upgrade…” section on https://startiot.telenor.com/learning/quick-start-guide/. So I mounted the module the wrong way on the expansion board for a while. Maybe the instructions on the above page could mention that the module should be mounted so that the LED is on top of the USB connector.

  • #1644
     Pontus Aurdal 
    Moderator

    Thank you for pointing that out!
    We’ve moved away from the previous articles to lesson based tutorials. You can find the corresponding lesson here: https://startiot.telenor.com/lessons/upgrading-the-firmware/

You must be logged in to reply to this topic.

CONTACT US

Do you have any feedback? Please use the forum for technical support.

Sending

©2019 Telenor Start IoT - Privacy Policy - Research Privacy Notice - fueled by Benzin

Log in with your credentials

Forgot your details?